The VC 292 can measure currents up to 60 A directly with the included clamp adapter and, like all devices in the VC-200 series, is optimized for training purposes.

High current measurement: The included CLA-60 current clamp adapter is suitable for non-contact measurement of alternating currents up to 60 A. In three-phase circuits, the distribution can be quickly and safely determined. The circuit does not need to be interrupted during measurement. The VOLTCRAFT VC-292 displays the measured value in amperes accurately in the current clamp mode, as the clamp and the multimeter are perfectly coordinated.

Sharp display: An impressive, clearly readable EBTN display in bright environments as well as in darkness. With a display diagonal of 7.9 cm (3.1 inches), all digits and symbols are presented significantly larger, reducing the risk of reading errors.

Measurement socket monitoring: Depending on the selected measurement parameter, the correct configuration of the measurement sockets is displayed. This is a great help for beginners and students to avoid incorrect handling. If a faulty connection is made despite the display, an audible warning will sound.

Safety during battery replacement: To change batteries or fuses, the housing must be opened. For safety reasons, the measurement leads should not be connected during this process. Unlike simple conventional devices, this measuring instrument is designed so that the housing cannot be opened while the measurement leads are connected. The measurement leads can only be reconnected after the housing is closed, as the measurement sockets are mechanically locked.

Safety through wear indicator: The measurement lead is double insulated in two colors. If the first insulation layer is damaged, a differently colored insulation layer becomes visible. This is optimal for training devices to replace worn measurement leads early.